
Safety Data Sheet	Download


Product Specification Sheet	Download

AEROPLEX 444 (10x14.1oz Cart)

0 reviews

vol: CASE

Quantity:

Total price: $6496.85

Warehouse availability: IN STOCK

Add to Cart

Get Ship Rate

Description

Castrol Aeroplex™ 444 is a hybrid synthetic, lithium complex NLGI Grade 2 grease. It contains proprietary Castrol additives and offers excellent low temperature properties. Aeroplex 444 has enhanced anti-wear, oil separation,corrosion resistance and low temperature torque characteristics.

Application

Aeroplex 444 is an extended-life grease designed for use in aircraft airframe equipment. It was specifically developed for the Boeing Company and is approved to BoeingSpecification BMS 3-34. Typical uses include roller bearings, actuator screws and other airframe equipment. This product should be used in accordance with the guidelines and maintenance practices specified by Boeing in applications requiring a BMS 3-34 grease or according to the requirements of other aircraft manufacturers.

Temperature Range

Aeroplex 444 will operate over the temperature range of -100°F to a maximum of 250°F (-73°C to 121°C).

Specification

Aeroplex 444 is approved to BMS 3-34.

Typical Characteristics

TEST METHOD	DESCRIPTION	SPECIFICATION REQUIREMENTS	RESULT
D 217	Penetration Un worked Worked, 60 strokes Worked, 100,000 strokes	200 Min 265- 315 265- 335	293 309 316
F 3005	Dirt Particles per cc of grease 25 - 74 microns > 75 microns	< 1000 None	207 None
D 1478	Low Temperature Torque, Maximum @ - 100°F (-73°C) Starting Running, 1 hr	0.74 N-m 0.09 N-m	0.45N-rn 0.04 N-m
Spec	Low Temperature Torque, Maximum @ - 100°F (-73°C) with 15% water Starting Running, 1 hr	15.3 N-m 0.33 N-m	4.30 N-m 0.07 N-m
D 2596	Weld Point	Report	400 kg
D 2596	Load Wear Index, EP	> 60 kg	61 kg
D 2266	4-Ball Wear	< 0.90 mm	0.47 mm
D 4170	Fretting Wear	Report	1.6 mg
D 3336	Anti-friction Bearing Performance, 121°C (250°F)	> 1000 hrs	1754 hrs
FTM 321	Oil Separation, 250 hrs @ 350°F (177°C) %	< 15%	3.50%
D 942	Oxidation Stability, Bomb Oxidation, Pressure Drop @ 100 hrs @ 500 hrs	< 10 psi <15 psi	4 psi 9 psi
JP 220 Procedure B	SKF Emcor Rust (2 bearings)	0 rating for both bearings	Pass
F 5309	Copper Strip Corrosion	1b	1b
D 1264	Water Washout, % 79°C, Test Pair Average, %	7.5	3.7

WARNING:
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.

Similar Products: