AEROSHELL FLUID 31 (5 GALLON PAIL)

vol: 5 Gal. / PAIL

Total price: $331.97

Warehouse availability: ON REQUEST

Price Request

AeroShell Fluid 31 is a synthetic hydrocarbon based aircraft hydraulic fluid with greatly improved fire resistance
characteristics when compared with conventional petroleum products. AeroShell Fluid 31 has a specially designed base stock which imparts a relatively high flash point, excellent low temperature properties and good oxidation and thermal stability. In addition, AeroShell Fluid 31 is formulated with high technology additives to provide oxidation and corrosion resistance, antiwear, and anti-foaming protection. AeroShell Fluid 31 is superclean filtered to ensure optimum performance in particulate monitored systems. AeroShell Fluid 31 is dyed red. The useful operating temperature range is –40 to +205°C.

Main Applications

AeroShell Fluid 31 is recommended for use in aircraft, ordnance, and missile systems operating from –40°C to
+205°C . This fluid should be considered for use in auto pilots, shock absorbers, brakes, flight control systems, hydraulic
servo-controlled systems and other systems using synthetic elastomer seals. An increasing number of aircraft
manufacturers now recommend use of this type of fluid in aircraft hydraulic systems in preference to mineral hydraulic
oils. This move has been prompted by need to use fluids with better fire resistant properties.

AeroShell Fluid 31 is also approved for use in the Honeywell (formerly Garrett) cooling turbine (cabin air compressors).
Increasingly this type of hydraulic fluid is being adopted for use in hydraulic systems of military aircraft in place of mineral
hydraulic fluids. AeroShell Fluid 31 is a synthetic hydrocarbon oil and should not be used in contact with incompatible seal materials.

AeroShell Fluid 31 is compatible with AeroShell Fluids 4, 41, 51, 61 and 71 and can be used in systems designed to operate with MIL-PRF-5606, MIL-PRF-6083, MIL-PRF-87257 and MILPRF-46170 fluids.

Chlorinated solvents should not be used for cleaning hydraulic components which use AeroShell Fluid 31. The residual solvent contaminates the hydraulic fluid and may lead to corrosion.

Specifications, Approvals & Recommendations

• Approved MIL-PRF-83282D (US)
• (MIL-PRF-83282D) (British)
• Equivalent to DCSEA 437/A (French)
• NATO Code H-537
• Joint Service Designation OX-19

WARNING:
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.