AEROSHELL FLUID 4 (55 GALLON DRUM)

vol: 55 Gal. / DRUM

Total price: $1590.15

Warehouse availability: ON REQUEST

Price Request

AeroShell Fluid 4 is a mineral hydraulic oil with very good low temperature characteristics and capable of operating over a wide temperature range. AeroShell Fluid 4 is composed of a mineral oil base stock and a complex additive package which results in a product with excellent low temperature flow and anti-wear properties, exceptional antifoam characteristics, and excellent oxidation stability. AeroShell Fluid 4 is dyed red.

Main Applications

AeroShell Fluid 4 is intended for use as a hydraulic fluid inundercarriage retraction mechanisms, flap jacks and control
mechanisms, brakes, shock absorbers, automatic pilots, oleo legs, tail wheels, servo units, etc. AeroShell Fluid 4 is also
suitable for lubricating de-icing pumps and gearboxes.

AeroShell Fluid 4 should be used in systems with synthetic rubber components and must not be used in systems
incorporating natural rubber. The latter systems require castor base fluids with which AeroShell Fluid 4 is not
interchangeable.

AeroShell Fluid 4 is compatible with AeroShell Fluids 31, 41,51, 61 and 71, although it is not recommended that AeroShell
Fluid 4 is used in systems that require the use of a super clean fluid nor should it be mixed with super clean fluids
for operational reasons.

Chlorinated solvents should not be used for cleaning hydraulic components which use AeroShell Fluid 4. The residual solvent contaminates the hydraulic fluid and may lead to corrosion.

Specifications, Approvals & Recs

• Meets MIL-H-5606A (US)
• (Obsolete – see AeroShell Fluid 41)
• Meets DTD 58.5 (Obsolete - see AeroShell Fluid 41) Approved
• DEF STAN 91.48 Grade Normal (European production only)
• (British)
• Approved DCSEA 415/A (French)
• Analogue to AMG-10 (Russian)
• NATO CODE H-520 (European production only)
• Joint Service Designation OM-18 (European production only)

WARNING:
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.