Economy rotary pump for 15-55 gallon container

vol: CASE

Total price: $121.94 $

Warehouse availability: IN STOCK

Add to Cart

1. Insert the suction pipe assembly (21) into the barrel.

2. Slide the bung nut (23) over the suction pipe
and screw it onto the barrel. Use the bolt (24) to 
tighten the suction pipe assembly.

3. Screw the pump body onto the suction pipe
assembly (21).

4. Slide the handle (12) over the pump shaft and
tighten it using the hexagon bolt (17).

5. Screw the delivery spout (18) onto the threaded
outlet on top of the pump body.

6. Prime the pump, if necessary, using a few drops. 
of oil, by turning the discharge spout (18) 
upwards. 

FITS: 30 gallons (100 liters) to 55 gallons (205 liters) Barrels

DELIVERY: 8oz per revolution.

COMPLETE WITH: Choices of a 3 piece rigid extension tube or a telescopic suction tube, bung nut 
and discharge spout. 

DO NOT USE WITH: Acids or alkaline solutions, trichlene, perchlene, thinner, etc

WARNING:
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.