LUBRIPLATE FGL-2 ANHYDROUS CALCIUM FOOD GRADE GREASE L0232-004 (CTN 12/16 OZ TUBS)
Total price: $225.12
Warehouse availability: IN STOCK
LUBRIPLATE FGL Greases have been formulated to meet the increased demands of the food, beverage and pharmaceutical industries. The trend towards NSF International H-1 Registered* products to replace H-2 products has meant a great deal of research and testing to improve the capabilities of lubricants with incidental food contact; LUBRIPLATE FGL greases are the result of these new demands. Now with LUBRI-ARMOUR, LUBRIPLATE’s anti-microbial additive which prevents the decomposition of lubricants caused by microorganisms. LUBRIPLATE FGL greases are treated with LUBRIARMOUR to remain fresh and last longer in harsh food processing environments.
Formulated with clear water-white, non-toxic, USP white oils that
comply with FDA Regulation 21 CFR 172.878.
Formulated with ingredients that comply with FDA regulation 21 CFR
178.3570 for lubricants with incidental food contact.
Unique thickener combination resists oil bleed problems often
encountered using conventional food grade lubricants.
Longer lasting film allows less lubricant usage and extended regreasing intervals.
Excellent stability helps retard softening of grease during high shear
mechanical action often experienced in high speed filling and packaging
High temperature stability and oxidation resistance.
Excellent resistance to water washout.
FGL-00 is a semi-fluid grease that is ideal for centralized lubrication
systems that require a NLGI 00 grade of grease. FGL-00 is also good for
older or leaky gear cases that can no longer contain an oil.
FGL-0 is qualified for centralized lubrication systems on high-speed canclosing equipment. This product is non-separating in pumping devices and
high-speed equipment. FGL-0 provides excellent anti-wear properties,
exceptional water resistance, rust, oxidation and corrosion preventive
FGL-l for many plants, this NLGI 1 grade grease may be the most widely
used lubricant due to its multi-functional capabilities. This includes low and
high speeds, low and high temperatures and a wide range of loads.
FGL-2 provides superior film strength for slower moving applications under
severe operating conditions such as water, steam, high temperature and
load. The excellent shear stability of this grease in combination with a
unique tackiness agent provides a long lasting durable film of lubricant for
large bearings, open gears, chains and other exposed surfaces.
|PROPERTY||TEST METHOD||TYPICAL RESULTS|
|Soap Base||Aluminum Complex||Aluminum Complex||Aluminum Complex||Aluminum Complex|
|Penetration Worked @ 60 Strokes||D-217||420||380||310||285|
|@ 10,000 Strokes||D-217||411||398||320||288|
|Dropping Point||D-566||410°F/ 210°C||435°F/ 224°C||460°F/ 238°C||515°F/ 268°C|
|Viscosity: SUS @ 100°F||D-2161||550||550||550||850|
|cSt @ 40°C||D-445||105||105||105||160|
|SUS @ 210°F||D-2161||66||66||66||66|
|cSt @ 100°C||D-445||11.5||11.5||11.5||11.5|
|Rust Prevention Procedure (B)||D-1743||Pass||Pass||Pass||Pass|
|Oxidation Stability||D-942||2.0 psi||2.0 psi||2.0 psi||2.0 psi|
|4-Ball Wear||D-2266||0.56 mm||0.56 mm||0.56 mm||0.56 mm|
|Lincoln Ventmeter Test @ 82°F||0 psig||0 psig||150 psig||300 psig|
|@ 30°F||0 psig||0 psig||350 psig||550 psig|
|@ 0°F||100 psig||150 psig||575 psig||925 psig|
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.