LUBRIPLATE HEAT TRANSFER OIL HIGH FLASH AND FIRE POINT OILS L0750-062 (55GL/DRUM)
vol: 55 Gal. / DRUM
Total price: $1611.22
Warehouse availability: IN STOCK
LUBRIPLATE Heat Transfer Oil is a high viscosity, high flash and fire, extra clean oil, recommended where exceptional heat transfer qualities are desirable.
Please note the exceptional high flash
point as shown in the test data.
LUBRIPLATE Heat Transfer Oil is recommended for oil-type heat exchangers used in asphalt plants, roofers’ tar kettles, concrete tile and black curing machines and many other similar industrial applications
Asphalt paving contractors, roofing contractors, concrete block and tile companies are only a few of your potential customers for this fine product.
LUBRIPLATE Heat Transfer Light and LUBRIPLATE Heat Transfer Extra Light are available for applications in which an SAE 20 or SAE 10 grade heat transfer oil is recommended.
TYPICAL TEST DATA
|PROPERTY||TEST METHOD||TYPICAL RESULTS*|
|Viscosity: SUS @ 210°F||ASTM D-2161||76||56||47|
|cSt @ 100°C||ASTM D-445||14||9||6|
|SUS @ 100°F||ASTM D-2161||731||310||180|
|cSt @ 40°C||ASTM D-445||135||60||34|
|Viscosity Index||ASTM D-2270||98||117||122|
|ISO Grade||ASTM D-2422||150||68||32|
|API Gravity||ASTM D-287||29.5||30.7||31.5|
|Flash Point||ASTM D-92||525°F/ 274°C||450°F/ 232°C||425°F/ 219°C|
|Fire Point||ASTM D-92||590°F/ 310°C||465°F/ 241°C||450°F/ 232°C|
|Pour Point||ASTM D-97||0°F/||-25°F/ -32°C||-35°F/ -37°C|
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.