Shop by brand:
Safety Data SheetDownload
Product Specification SheetDownload

LUBRIPLATE LITHIUM-POLYMER TYPE GREASE L0104-035 No. 1241 (35 Lb Pail)

vol: 5 Gal. / PAIL

Quantity:

Total price: $265.92

Warehouse availability: IN STOCK

 

LUBRIPLATE "1240" SERIES

LUBRIPLATE No. 1240, 1241 and 1242 are polymer type lubricants designed for heavy-duty and severe service applications that call for continuous protection under heavy load, moisture and other environmental extremes.

LUBRIPLATE No. 1242 is an NLGI grade 2 lubricant and is an excellent multipurpose, extreme pressure grease. LUBRIPLATE No. 1242 is recommended for the following:

Heavy-Duty Chassis Lubrication

Ball Joints, King Pins, Steering Knuckles

Bucket Loader Ball Joints

Open Gears, Racks, Cams, Slides and Ways

The additive system in LUBRIPLATE No. 1242 enables it to prevent fretting corrosion. Because of its polymer molecular structure, LUBRIPLATE No. 1242 grease is ideal for oscillating motion.

LUBRIPLATE No. 1241 is ideally suited for bushing and sleeve-type bearings especially in heavy load, tight tolerance applications to form a continuous film without sacrificing shear stability.

LUBRIPLATE No. 1240 is also ideal for heavy load, tight tolerance situations and can be pumped easily through automatic dispensing systems on construction and mining equipment as well as industrial applications.

ADVANTAGES

- Excellent extreme pressure anti-wear protection.

- Extremely shear-stable for longer effective periods of lubrication.

- High temperature capabilities.

- Very good sealing properties to keep out water and dirt.

- Polymer type to improve tenacity and stay-put properties under high shear and heavy load conditions.

- Outstanding water resistance.

- Easily pumped through automatic grease systems.

ISO-9001 Registered Quality System.

ISO-21469 Compliant.

 

Typical Tests on the LUBRIPLATE "1240" Series is as follows:

    TIPICAL TESTS                                                      LUBRIPLATE No. 1241

 

Type of Base

Lithium

Worked Penetration Range

310 to 340 

Worked Penetration

60 Strokes

10 000 Strokes

100 000 Strokes

 

322

338

352

 

Bomb Test (D-942

3 psi per 100 hours

Viscosity SUS @ 100°F

cSt @ 40°C

1250

237

Viscosity SUS @ 210°F  

cSt @ 100°C

95

19

NGGI No.

1

ASTM Dropping Point

400°F+/205°C

Color

 Beige

Water Washout Characteristics

Grease @ 175°F (D-1264)

2.5 %

 

WARNING:
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.