LUBRIPLATE SFL-1 ALUMINIUM COMPLEX FOOD GRADE GREASE L0197-035 (35 Lb Pail)

vol: 5 Gal. / PAIL

Single Pack

$440.51

$440.51 / each

10 Pack

$4184.8

$418.48 / each

20 Pack

$8193.4

$409.67 / each

36 Pack

$14589.72

$405.27 / each

Total price: $440.51 $

Warehouse availability: IN STOCK

Add to Cart

DESCRIPTION

The LUBRIPLATE SFL Series was developed to meet the ever-increasing demands placed on food-processing equipment today. The synthetic base fluid and the aluminum complex soap thickener allows for a wide operating temperature range for all four NLGI consistencies. *Now with LUBRI-ARMOUR, LUBRIPLATE’s anti-microbial additive developed to prevent the decomposition of lubricants caused by microorganisms. LUBRIPLATE SFL greases treated with LUBRI-ARMOUR remain fresh and last longer in harsh food processing plant environments.

 

APPLICATIONS & ADVANTAGES

LUBRIPLATE SFL-1 has an approximate operating temperature range of -60°F to 300°F making it ideal for freezer and other cold temperature applications where conventional food-grade greases cannot be used. In addition to its exceptional low temperature pumpability, its high shear stability, excellent water resistance and outstanding loadcarrying properties make LUBRIPLATE SFL-1 the only choice for extreme low temperature applications requiring a product that meets former USDA 1998 Guidelines and is NSF International H-1 Registered. LUBRIPLATE SFL-0 and LUBRIPLATE SFL-00 are similar to SFL-1 with the exception that they have softer consistencies, which are NLGI 0 and NLGI 00 respectively. LUBRIPLATE SFL-0 and LUBRIPLATE SFL-00 also have an approximate operating temperature range of -60°F to 300°F. LUBRIPLATE SFL-2 is a synthetic multi-purpose food-grade grease, which can be used throughout most modern food processing plants for most all grease lubrication requirements. This product has an approximate operating temperature range of +10°F to 350°F.

 

PROPERTY	TEST METHOD		TYPICAL RESULTS*
	ASTM	SFL-2	SFL-1	SFL-0	SFL-00
Thickener		Aluminum Complex	Aluminum Complex	Aluminum Complex	Aluminum Complex
NLGI No.		2	1	0	0
Penetration Range	D-217	265 - 295	310 - 340	355 - 385	400 - 430
Dropping Point °F/°C	D-566	500°F/ 260°C	450°F/ 232°C	425°F/ 218°C	400°F/ 204°C
Low Temp. Torque @ -40°F Starting Torque	D-1478	***	1,853 gm-cm	618 gm-cm	358 gm-cm
Running Torque - One Hour	D-1478	***	260 gm-cm	137 gm-cm	163 gm-cm
Water Washout	D-1264	2.50%	6.30%	8.10%	12.50%
Four Ball Wear Test	D-2266	0.60 mm	0.59 mm	0.55 mm	0.55 mm
Lincoln Ventmeter                  @ 75°F/24°C		N/A	200 psig	0 psig	0 psig
@ 30°F/-1°C		N/A	325 psig	0 psig	0 psig
@ 0°F/-18°C		N/A	500 psig	150 psig	150 psig
@ -30°F/-34°C		N/A	1050 psig	800 psig	650 psig
Viscosity:                               SUS @ 100°F	D-2161	1070	200	200	200
SUS @ 210°F	D-2161	105	49	49	49
cSt @ 40°C	D-445	219	39	39	39
cSt @ 100°C	D-445	21	7	7	7
Viscosity Index	D-2270	114	127	127	127
Flash Point °F/°C	D-92	400/204	400/204	400/204	400/204
Pour Point °F/°C	D-97	0.80645	1.17647	1.17647	1.17647

WARNING:
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.