LUBRIPLATE SPO-277 GEAR AND BEARING OIL L0247-035 (35 Lb Pail)
vol: 5 Gal. / PAIL
Total price: $273.91
Warehouse availability: IN STOCK
LUBRIPLATE SPO Lubricants provide a tacky, superior lubricating film for high-sliding action in worm, bevel, helical and spur gears as well as machine ways, chains etc. This series of mineral oil based products will reduce friction and heat, thus improving efficiency. The anti-wear properties are compatible with brass, bronze and silver-alloy metals. They are excellent for areas of high moisture, heat and load found in many industries ranging from quarries and mills to food processing plants.
Reduce friction, wear and lower operating temperatures, thus
reducing power consumption and lowering maintenance costs.
Provide excellent oxidation and thermal stability which retards the
formation of acidic contaminants, carbonaceous material and
increased viscosities, thus extending fluid life.
Provide excellent demulsibility and filterability, thus allowing water
and contaminants to be easily removed.
Provide an anti-wear, tacky, cohesive lubricant film protecting all
metal surfaces against rust and corrosion and protects copper
and copper alloys from chemical attack by contaminants.
Provides lubricant consolidation, e.g. one oil for gear boxes,
bearings and ways.
Provide seal compatibility.
LUBRIPLATE SPO Lubricants are specially designed for a wide variety of industrial applications such as gear cases, machine ways, chains and general purpose lubrication. These oils will provide a long-lasting wear resistant film that reduces friction and heat. The polar affinity of SPO protects metal surfaces from rust and corrosion as well as chemical corrosion. These oils have excellent demulsibility, oxidation resistance and thermal stability, thus extending lubricant life.
TYPICAL TESTS FOR LUBRIPLATE SPO LUBRICANTS ARE AS FOLLOWS:
|PROPERTY||TEST METHOD||TYPICAL RESULTS*|
|Viscosity SUS @ 100°F||ASTM D-2161||317||464||685||1044|
|Viscosity cSt @ 40°C||ASTM D-445||63||91||135||200|
|Viscosity SUS @ 210°F||ASTM D-2161||55||63||75||95|
|Viscosity cSt @ 100°C||ASTM D-445||9||11||14||19|
|Viscosity Index||ASTM D-2270||109||103||102||103|
|API Gravity||ASTM D-287||30.8||30||29.9||29.3|
|Flash Point||ASTM D-92||415°F/213°C||450°F/232°C||460°F/238°C||465°F/241°C|
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.