
Safety Data Sheet	Download


Product Specification Sheet	Download

LUBRIPLATE SYN LUBE 22 100% SYNTHETIC, POLYALPHAOLEFIN (PAO)-BASED HYDRAULIC FLUIDS L0968-062 (55GL/DRUM)

0 reviews

vol: 55 Gal. / DRUM

Quantity:

Total price: $3086.57

Warehouse availability: IN STOCK

Add to Cart

Get Ship Rate

DESCRIPTION

LUBRIPLATE SYN LUBE ISO VG Fluids 22 through 100 are high performance, zinc-free synthetic fluids for industrial machine applications. These fluids are 100% synthetic based products formulated with a combination of PAO and ester technology.

ADVANTAGES

LUBRIPLATE SYN LUBE Synthetic Fluids provide several
advantages over mineral oil based products.

ENERGY SAVINGS

SYN LUBE Synthetic Fluids exhibit high viscosity indexes,
excellent lubricity, very low coefficients of friction and
superior heat transfer characteristics, resulting in lower
operating temperatures and lower power consumption

EXTENDED DRAIN INTERVALS

Excellent thermal and oxidation stability characteristics
increase the service life of the lubricant many times over
that of petroleum oils

Provide outstanding water demulsibility allowing for any
water that may have entered the system to be rapidly
separated from the SYN LUBE Synthetic Fluids. The water
can then be easily drained and emulsion problems can be
averted

Generally, intervals of 8,000 hours of compressor fluid
service can be achieved, depending on operating
conditions. LUBRIPLATE Division encourages the use
of our Free Oil Analysis Program to determine the
extended drain interval

FLUID/MATERIAL COMPATIBILITY

SYN LUBE Synthetic Fluids are compatible with mineral oil

products avoiding time- consuming flushing procedures and
allowing conversion to be simplistic. Always consult
LUBRIPLATE prior to conversion if compatibility is an
issue.

SYN LUBE Synthetic Fluids are recommended for use with
high Nitrile Buna-N, Teflon, Viton, Fluorosilicone and
Polysulfide elastomers. These fluids are not recommended
for use with low Nitrile Buna-N, Neoprene or natural rubber

APPLICATIONS

LUBRIPLATE SYN LUBE Synthetic Fluids are available in (5) ISO Viscosity Grades (ISO VG 22, 32, 46, 68, and 100) and recommended for many types of rotary screw and rotary vane air compressors. These synthetic fluids are excellent for high temperature bearing and chain applications as well as situations striving for improved efficiency and extended drain intervals. They are also excellent products for centrifugal air compressors, all types of hydraulic systems and turbine oil applications.

TYPICAL TESTS FOR LUBRIPLATE SYN LUBE SYNTHETIC FLUID SERIES ARE AS FOLLOWS:

PROPERTY	TEST METHOD	TYPICAL RESULTS*
		SYN LUBE 22	SYN LUBE 32	SYN LUBE 46	SYN LUBE 68	SYN LUBE 100
Viscosity cSt @ 40°C	ASTM D-445	23	32	44	66	110
Viscosity cSt @ 100°C	ASTM D-445	5	6	8	10	15
Viscosity Index	ASTM D-2270	138	136	138	138	142
Pour Point	ASTM D-97	-70°F/-57°C	-70°F/-57°C	-65°F/-54°C	-60°F/-51°C	-55°F/-48°C
Flash Point	ASTM D-92	420°F/216°C	470°F/243°C	485°F/250°C	515°F/267°C	530°F/277°C
Fire Point	ASTM D-92	470°F/243°C	505°F/263°C	550°F/288°C	580°F/304°C	590°F/310°C
API Gravity	ASTM D-287	39.6	37	37.4	37.8	36.7
Color	ASTM D-1500	1.0 max	1.0 max	1.0 max	1.0 max	1.0 max
Density (Pounds/Gallon)		6.89	6.993	6.976	6.96	7.005
ISO Viscosity Grade		22	32	46	68	100
Auto ignition Temperature (734°F)	ASTM E-659	ND	>700°F	>700°F	>700°F	>700°F
4-Ball Wear Test	ASTM D-4172	0.5mm	0.5mm	0.5mm	0.5mm	0.5mm
Copper Corrosion	ASTM D-130	1a	1a	1a	1a	1a
Conradson Carbon Residue	ASTM D-189	Nil	Nil	Nil	Nil	Nil
Emulsion Characteristics @ 82°C	ASTM D-1401	40-40-0 (10)	40-40-0 (10)	40-40-0 (10)	40-40-0 (20)	40-40-0 (20)
Rust Test Procedure B	ASTM D-665	Pass No Corrosion	Pass No Corrosion	Pass No Corrosion	Pass No Corrosion	Pass No Corrosion
Rotating Bomb Oxidation Test (Minutes)	ASTM D-2272	>2000	>2000	>2000	>2000	>2000
Demulsibility Characteristics	ASTM D-2711
Procedure B; Run 1: Percent of Water in Oil		0.40%	0.40%	0.40%	0.20%	0.20%
Free Water Volume		86.0 ml	86.0 ml	86.0 ml	84.0 ml	84.0 ml
Emulsion Volume		0.0 ml	0.0 ml	0.0 ml	0.0 ml	0.0 ml
Demulsibility Characteristics	ASTM D-2711
Procedure B; Run 2: Percent of Water in Oil		0.10%	0.10%	0.10%	0.30%	0.30%
Free Water Volume		87.8 ml	87.8 ml	87.8 ml	84.7 ml	84.7 ml
Emulsion Volume		0.0 ml	0.0 ml	0.0 ml	0.0 ml	0.0 ml
Demulsibility Characteristics	ASTM D-2711
Procedure B; Average: Percent of Water in Oil		0.07%	0.07%	0.07%	0.30%	0.30%
Free Water Volume		86.9 ml	86.9 ml	86.9 ml	84.4 ml	84.4 ml
Emulsion Volume		0.0 ml	0.0 ml	0.0 ml	0.0 ml	0.0 ml

WARNING:
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.

Similar Products: