
Safety Data Sheet	Download


Product Specification Sheet	Download

LUBRIPLATE SYNAC-150 DIESTER-BASED, 100% SYNTHETIC COMPRESSOR FLUIDS L0936-062 (55GL/DRUM)

0 reviews

vol: 55 Gal. / DRUM

Quantity:

Total price: $4258.98

Warehouse availability: IN STOCK

Add to Cart

Get Ship Rate

DESCRIPTION

LUBRIPLATE SYNAC 150, 220 & 320 Series products are diester based synthetic fluids formulated to meet a multitude of demanding applications where traditional petroleum based lubricants may not be desirable. These diester based synthetic fluids are outstanding lubricants for applications in which the fluid is subjected to high temperature and high stress conditions over extended drain intervals. The extended drain interval capabilities of LUBRIPLATE SYNAC Series make them a very cost effective solution for your lubricant needs.

APPLICATIONS

The LUBRIPLATE SYNAC 150, 220 & 320 Series make excellent lubricants for vacuum pumps, blowers, gear boxes, centrifuges and chains.

ADVANTAGES

Excellent High Temperature Stability and Oxidation
Resistance = Extended Lubricant Life

Very Low Deposit Forming Tendencies = Clean Operation

Excellent Demulsibility Characteristics = High Separator
Efficiency

High Flash Point and Low Pour Point = Wide Operating
Temperature Range

Outstanding Anti-Wear Protection

Foam Suppression Properties

Corrosion Inhibitors

Excellent Rust Protection

LUBRIPLATE SYNAC Lubricants are compatible with other
LUBRIPLATE products such as LUBRIPLATE AC Oils,
LUBRIPLATE HO Oils, and LUBRIPLATE SFGO Series Fluids.

TYPICAL TEST DATA

PROPERTY	TEST METHOD	TYPICAL RESULTS*
		SYNAC	SYNAC	SYNAC
		150	220	320
Viscosity:
SUS @ 100°F	ASTM D-2161	754	1003	1496
SUS @ 210°F	ASTM D-2161	71.3	82.5	99.1
cSt @ 40°C	ASTM D-445	147	200.6	290.1
cSt @ 100°C	ASTM D-445	12.6	15.61	20.04
Viscosity Index	ASTM D-2270	71	74	77
Pour Point	ASTM D-97	-25°F/ -32°C	-20°F/ -29°C	-5°F/ -20°C
Flash Point	ASTM D-92	540°F/ 282°C	545°F/ 285°C	475°F/ 246°C
Fire Point	ASTM D-92	570°F/ 299°C	575°F/ 302°C	505°F/ 263°C
API Gravity	ASTM D-287	15.8	15.3	17.3
Color	ASTM D-1500	<1.0	<1.0	<1.0
Density		8	8.03	7.92
ISO Vis. Grade		150	220	320
4-Ball Wear Test	ASTM D-4172	0.45 mm	0.45 mm	0.45 mm
Copper Corrosion	ASTM D-130	1a	1a	1a
Conradson Carbon Residue	ASTM D-189	Nil	Nil	Nil
Emulsion Characteristics	ASTM D-1401	43-37-0	43-37-0	43-37-0
Emulsion Characteristics	ASTM D-1401	-25	-25	-25
Evaporation Loss	ASTM D-972	3.0 Max.	3.0 Max.	3.0 Max.
Rust Test Procedure B	ASTM D-665	Pass –	Pass –	Pass –
		No	No	No
		Corrosion	Corrosion	Corrosion

WARNING:
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.

Similar Products: