Shop by brand:
Safety Data SheetDownload
Product Specification SheetDownload

LUBRIPLATE SYNAC-220 DIESTER-BASED, 100% SYNTHETIC COMPRESSOR FLUIDS L0937-062 (55GL/DRUM)

vol: 55 Gal. / DRUM

Quantity:

Total price: $5522.71

Warehouse availability: IN STOCK

DESCRIPTION

LUBRIPLATE SYNAC 150, 220 & 320 Series products are diester based synthetic fluids formulated to meet a multitude of demanding applications where traditional petroleum based lubricants may not be desirable. These diester based synthetic fluids are outstanding lubricants for applications in which the fluid is subjected to high temperature and high stress conditions over extended drain intervals. The extended drain interval capabilities of LUBRIPLATE SYNAC Series make them a very cost effective solution for your lubricant needs.

 

APPLICATIONS

The LUBRIPLATE SYNAC 150, 220 & 320 Series make excellent lubricants for vacuum pumps, blowers, gear boxes, centrifuges and chains.

 

ADVANTAGES


Excellent High Temperature Stability and Oxidation
Resistance = Extended Lubricant Life

 

Very Low Deposit Forming Tendencies = Clean Operation

 

Excellent Demulsibility Characteristics = High Separator
Efficiency

 

High Flash Point and Low Pour Point = Wide Operating
Temperature Range

 

Outstanding Anti-Wear Protection

 

Foam Suppression Properties

 

Corrosion Inhibitors

 

Excellent Rust Protection


LUBRIPLATE SYNAC Lubricants are compatible with other
LUBRIPLATE products such as LUBRIPLATE AC Oils,
LUBRIPLATE HO Oils, and LUBRIPLATE SFGO Series Fluids.

 

TYPICAL TEST DATA

PROPERTY  TEST METHOD  TYPICAL RESULTS* 
    SYNAC  SYNAC  SYNAC 
150 220 320
Viscosity:          
SUS @ 100°F  ASTM D-2161  754 1003 1496
SUS @ 210°F  ASTM D-2161  71.3 82.5 99.1
cSt @ 40°C  ASTM D-445  147 200.6 290.1
cSt @ 100°C  ASTM D-445  12.6 15.61 20.04
Viscosity Index  ASTM D-2270  71 74 77
Pour Point  ASTM D-97  -25°F/ -32°C  -20°F/ -29°C  -5°F/ -20°C 
Flash Point   ASTM D-92  540°F/ 282°C  545°F/ 285°C  475°F/ 246°C 
Fire Point  ASTM D-92  570°F/ 299°C  575°F/ 302°C  505°F/ 263°C 
API Gravity  ASTM D-287  15.8 15.3 17.3
Color  ASTM D-1500  <1.0  <1.0  <1.0 
Density    8 8.03 7.92
ISO Vis. Grade    150 220 320
4-Ball Wear Test  ASTM D-4172  0.45 mm  0.45 mm  0.45 mm 
Copper Corrosion  ASTM D-130  1a  1a  1a 
Conradson Carbon Residue  ASTM D-189  Nil  Nil  Nil 
Emulsion Characteristics   ASTM D-1401  43-37-0  43-37-0  43-37-0 
-25 -25 -25
Evaporation Loss  ASTM D-972  3.0 Max.  3.0 Max.  3.0 Max. 
Rust Test Procedure B  ASTM D-665  Pass –  Pass –  Pass – 
No  No  No 
Corrosion  Corrosion  Corrosion 

 

 

WARNING:
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.