Shop by brand:
Safety Data SheetDownload
Product Specification SheetDownload

LUBRIPLATE SYNAC-68 DIESTER-BASED, 100% SYNTHETIC COMPRESSOR FLUIDS L0934-062 (55GL/DRUM)

vol: 55 Gal. / DRUM

Quantity:

Total price: $3947.87

Warehouse availability: IN STOCK

DESCRIPTION

LUBRIPLATE SYNAC Series products are diester based synthetic compressor fluids formulated to meet a multitude of demanding compressor applications where traditional petroleum based lubricants may not be desirable. These diester based synthetic fluids are outstanding lubricants for applications in which the fluid is subjected to high temperature and high stress conditions over extended drain intervals. The extended drain interval capabilities of LUBRIPLATE SYNAC Series make it a very cost effective solution to your compressor applications.

 

APPLICATIONS

The LUBRIPLATE SYNAC Series are recommended for all types of rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for vacuum pumps and blowers.

 

ADVANTAGES


Excellent High Temperature Stability and Oxidation
Resistance = Extended Lubricant Life

 

Very Low Deposit Forming Tendencies = Clean
Operation

 

Excellent Demulsibility Characteristics = High
Separator Efficiency

 

High Flash Point and Low Pour Point = Wide Operating
Temperature Range

 

Outstanding Anti-Wear Protection = Long Bearing and
Cylinder Life

 

Foam Suppression Properties = Extended Vane and
Screw Life

 

Corrosion Inhibitors = Excellent Rust Protection


LUBRIPLATE SYNAC Lubricants are compatible with other
LUBRIPLATE products such as LUBRIPLATE AC Oils,
LUBRIPLATE HO Oils, and LUBRIPLATE SFGO Series
Fluids

 

TYPICAL TEST DATA

PROPERTY  TEST METHOD  TYPICAL RESULTS* 
    SYNAC  SYNAC  SYNAC  SYNAC 
32 46 68 100
Viscosity:            
SUS @ 100°F  ASTM D-2161  155 213 311 510
SUS @ 210°F  ASTM D-2161  46 49 53 60
cSt @ 40°C  ASTM D-445  31 44 64 100
cSt @ 100°C  ASTM D-445  6 7 8 10
Viscosity Index  ASTM D-2270  135 118 98 76
Pour Point  ASTM D-97  -45°F/ -43°C  -35°F/ -37°C  -20°F/ -29°C  -15°F/ -26°C 
Flash Point   ASTM D-92  450°F/ 232°C  455°F/ 235°C  455°F/ 235°C  450°F/ 232°C 
Fire Point  ASTM D-92  530°F/ 277°C  535°F/ 279°C  535°F/ 279°C  530°F/ 277°C 
API Gravity  ASTM D-287  23.2 21 19 18.2
Color  ASTM D-1500  L -0.5  L -0.5  L -0.5  L -0.5 
4-Ball Wear  ASTM D-2266  .4 mm  .4 mm  .4 mm  .4 mm 
SAE Grade    10 20 20 30
ISO Vis. Grade    32 46 68 100

WARNING:
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.