LUBRIPLATE SYNXTREME FG-1 SYNTHETIC FOOD GRADE GREASE L0306-035 (35 Lb Pail)

vol: 5 Gal. / PAIL

Single Pack

$673.75

$673.75 / each

10 Pack

$6400.6

$640.06 / each

20 Pack

$12531.8

$626.59 / each

36 Pack

$22314.6

$619.85 / each

Total price: $673.75 $

Warehouse availability: IN STOCK

Add to Cart

DESCRIPTION

LUBRIPLATE SYNXTREME FG products are 100% synthetic, calcium sulfonate-based greases. Their advanced technology delivers outstanding shear stability, reduced wear and excellent resistance to water and other corrosive substances. These food grade greases are manufactured with ingredients that comply with FDA 21 CFR 178.3570. *Now treated with LUBRI-ARMOUR, LUBRIPLATE’s antimicrobial additive developed to prevent the decomposition of lubricants caused by microorganisms. LUBRIPLATE SYNXTREME FG greases treated with LUBRI-ARMOUR, remain fresh and last longer in harsh food processing plant environments.

 

APPLICATIONS

The synthetic fluid used in these greases delivers increased oxidation stability and enables them to be effective at application temperatures up to 400ºF with frequent re-lubrication intervals.

 

ADVANTAGES

Mechanical stability - the greases do not thin out.

 

Delivers excellent anti-wear (AW) and extreme
pressure (EP) protection. (See specific results on
back page)

 

Calcium sulfonate thickener delivers unsurpassed
rust and corrosion prevention.

 

Excellent resistance to chemically treated water
washdown procedures at high temperatures.

 

TYPICAL TEST DATA

PROPERTY	TEST METHOD	TYPICAL RESULTS
		FG-2	FG-1	FG-0
Thickener		Calcium Sulfonate Complex	Calcium Sulfonate Complex	Calcium Sulfonate Complex
NLGI Grade		2	1	0
Color	Visual	Tan	Tan	Tan
Texture	Visual	Smooth	Smooth	Smooth
Dropping Point	ASTM D-2265	>600°F	>600°F	>600°F
Unworked Penetration	ASTM D-217	277	314	349
Worked Penetration	ASTM D-217	280	318	361
Oil Separation - % Loss	ASTM D-1742	0	0	N/A
Water Washout	ASTM D-1264	<0.5	<0.5	<0.5
Rust Prevention	ASTM D-1743	Pass	Pass	Pass
Four ball Wear	ASTM D-2266	0.45mm	0.50mm	0.58mm
Evaporation Loss	ASTM D-972	0.11	0.11	0.18
4-Ball EP - Weld Load	ASTM D-2596	420	400	315
Oxidation Stability	ASTM D-942	-1 psi	-1 psi	0 psi
Base Fluid Type		PAO	PAO	PAO
ISO VG	ASTM D-2422	100	100	100
Viscosity @ 40°C - cSt	ASTM D-445	90 - 110	90 - 110	90 - 110
Cold Test		-40°F	-40°F	-40°F
NLGI GC/LB		Passed

 

WARNING:
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.