LUBRIPLATE UTF BIOBASED GREEN ULTIMATELY BIODEGRADABLE (PW1), VEGETABLE-BASED, UNIVERSAL TRACTOR FLUID L1072-062 (55GL/DRUM)

vol: 55 Gal. / DRUM

Single Pack

$5515.29

$5515.29 / each

4 Pack

$20737.48

$5184.37 / each

8 Pack

$40592.56

$5074.07 / each

Total price: $5515.29 $

Warehouse availability: IN STOCK

Add to Cart

DESCRIPTION

LUBRIPLATE UTF Biobased Green is a universal tractor fluid that incorporates Stabilized* additive technology with biodegradable vegetable based stocks. This formulation contains special frictional modifiers for the Wet Brake’s equipment design and is compounded with detergent, dispersant, anti-wear, anti-rust and anti-foam inhibitors. LUBRIPLATE UTF Biobased Green is an ultimately biodegradable1 , multi-grade lubricant that can be used in agricultural, industrial and construction equipment and has proven field performance.

 

ADVANTAGES

LUBRIPLATE UTF Biobased Green is an ENVIRONMENTALLY RESPONSIBLE hydraulic fluid that is formulated from renewable, agricultural plant resources. We believe Earth’s environmental future rests in the use of renewable materials. High Oleic Base Stocks (HOBS) are agricultural vegetable oils. This Stabilized technology allows the HOBS to perform as a high performance formula in high and low temperature applications, reducing oil thickening and deposits. 1Ultimate Biodegradation (Pw1) within 28 days in ASTM D-5864 Aerobic Aquatic Biodegradation of Lubricants

 

APPLICATIONS

Meets or exceeds all of the requirements of John Deere’s Hygard (Specification J20-C); Allison C-3, Cat TO-2 and API GL-4, Low-Speed/High Torque.

 

TYPICAL TEST DATA

PROPERTY	TEST METHOD	TYPICAL RESULTS*	SPECIFICATION
			LIMITS
Viscosity @ 100ºC	ASTM D-445	10.26	9.10 min.
Viscosity @ 40ºC	ASTM D-445	47.8	None
Viscosity Index	ASTM D-2270	210	140
Shear Stability Orbahn	ASTM D-6278	9.38	9.10 min.
Vis. @ 100ºC (after shear)
Brookfield Viscosity @ -20ºC	ASTM D-2983	1,650	4,500 max.
5,500 per J. Deere @ -35ºC		11,150	70,000 max.
Flash Point, ºC	ASTM D-92	251	200 min.
Stable Pour Point, ºC	ASTM D-5950	-39	-37 max.
Oxidation Stability:     Evaporation Loss	JDQ 16	0.65%	5.0% max.
Viscosity Increase @ 100ºC		5.02%	10.0% max.
Viscosity Increase @ 40ºC		4	***
Sludge Formation		None	None
Additive Separation		None	None
Rust Protection	JDQ 22	>100	100 hrs. min.
Copper Corrosion	JDQ 32	1A	1B max.
Foaming Characteristics:      Sequence I	JDQ 33	40/0	25/0 ml. max
Foam Breaktime		82	30 sec. max.
Sequence II		0/0	50/0 ml. max.
Foam Breaktime		0	30 sec. max.
Sequence III		30/0	25/0 max.
Foam Breaktime		0	30 sec. max.
Water Sensitivity:                        Solids	JDQ 19	0	0.1% v max.
Additive Loss		0	15.0% wt. max.
Extreme Pressure Properties:	JDQ 34	0.5 mg.	1.5 mg. max
Timken Abrasion Mass Loss
Timken OK Load		73 N	45 N min.

WARNING:
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.