Shop by brand:
Product Specification SheetDownload

MILES KOOL SOL SYN-G (5 GAL. PAIL)

vol: 5 Gal. / PAIL

Quantity:

Total price: $147.82

Warehouse availability: IN STOCK

General Description

MILES KOOL SOL SYN-G is a heavy-duty oil-free synthetic cutting and grinding fluid concentrate designed to offer good lubricity as well as excellent corrosion control on machinery and workpieces while providing a long sump life. This product may be used on a variety of metals, including steels, cast iron and aluminum; in
operations ranging from grinding to turning to milling.

Application

MILES KOOL SOL SYN-G has been designed for machining most metals except magnesium. Excellent on cast iron. This product may also be used for grinding: blanchard, diamond wheel, belt, disk, etc. NOTE: Since this product is completely oil-free, it may be used in most coolant mist units for machining and grinding operations.

Advantages

Excellent Corrosion Inhibition

Nitrite-Free

Chlorine-Free

Phenol-Free

Very Low Foam - Excellent on High Pressure or
High Speed Machining

Excellent Cooling for Ability to Maintain Close Tolerances

Tolerant of Hard Water

Resistant to Damage from Tramp Oil

Water Extendable- Economical

Long Tank Life

Recommended Concentrations

Application

Concentration, %

Ratio

Refractometer

Milling, Drilling, Turning

5% - 10%

1:10 - 1:20

1.4 - 2.7

Centerless, ID, OD, Surface Grinding

4%

1:25

1.1

Tapping, Sawing, Reaming

10%

1:10

2.7

         
 
 

 

Mixing Instructions

When mixing coolant, it is best to use an automatic proportioner which accurately and thoroughly mixes coolant. To maintain proper concentration, make-up should be added at one-half of the desired concentration.

Concentration, %

4%

5%

6%

7%

8%

9%

10%

Ratio

1:25

1:20

1:17

1:14

1:12

1:11

1:10

Refractometer

1.1

1.4

1.6

1.9

2.2

2.4

2.7

 
 

 

Typical Properties

Appea rance-Concentrate

Blue liquid

Appearance- Dilution

Transparent Blue

Residual Film

Soft, soluble

pH @ 20:1

9.5 ± 0.2

Specific Gravity @ 60°F

1.03 ± 0.03

Lbs/Gallon

8.6 ± 0.1

Flash point, PMCC

None

 

MILES KOOL SOL SYN-G is available in 5 gallon pails, 55 gallon drums and 275 gallon IBCs.

 


WARNING:
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.