Shop by brand:
Safety Data SheetDownload

MILES KOOL SOL SYN (55 GAL. DRUM)

vol: 55 Gal. / DRUM

Quantity:

Total price: $1264.16

Warehouse availability: ON REQUEST

General Description

MILES KOOL SOL SYN is a heavy-duty oil-free synthetic cutting and grinding fluid concentrate designed to offer outstanding machining performance as well as excellent corrosion control on machinery and workpieces while providing a long sump life. This product may be used on a variety of metals, including steels, cast iron and aluminum; in operations ranging from grinding to turning to milling.

Application

MILES KOOL SOL SYN has been designed for machining most metals except magnesium. Excellent on cast iron. This product may also be used for grinding: blanchard, diamond wheel, belt, disk, etc. NOTE: Since this product is completely oil-free, it may be used in most coolant mist units for machining and grinding operations.

Advantages

Superior Machining Lubrication

Nitrite-Free

Chlorine-Free

Phenol-Free

Very Low Foam - Excellent on High Pressure or
High Speed Machining

Excellent Cooling for Ability to Maintain Close Tolerances

Tolerant of Hard Water

Resistant to Damage from Tramp Oil

Water Extendable- Economical

Long Tank Life

Recommended Concentrations

Application

Concentration, %

Ratio

Refractometer

Milling, Drilling, Turning

5% - 10%

1:10 - 1:20

1.6 - 3.2

Centerless, ID, OD, Surface Grinding

4%

1:25

1.3

Tapping, Sawing, Reaming

10%

1:10

3.2

         

 

Mixing Instructions

When mixing coolant, it is best to use an automatic proportioner which accurately and thoroughly mixes coolant. To maintain proper concentration, make-up should be added at one-half of the desired concentration.

Concentration, %

4%

5%

6%

7%

8%

9%

10%

Ratio

1:25

1:20

1:17

1:14

1:12

1:11

1:10

Refractometer

1.3

1.6

1.9

2.2

2.6

2.9

3.2

 

Typical Properties

Appea rance-Concentrate

Blue liquid

Appearance- Dilution

Transparent Blue

Residual Film

Soft, fluid

pH @ 20:1

9.5 ± 0.2

Specific Gravity @ 60°F

1.04 ± 0.03

Lbs/Gallon

8.7 ± 0.1

Flash point, PMCC

None

MILES KOOL SOL SYN is available in 5 gallon pails, 55 gallon drums and 275 gallon IBCs.


WARNING:
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.