MILES STRATUS - T - 32 (RUST OXIDATION)(5 Gal. Pail)

vol: 5 Gal. / PAIL

Single Pack

$74.24

$74.24 / each

10 Pack

$705.3

$70.53 / each

20 Pack

$1336.4

$66.82 / each

36 Pack

$2351.88

$65.33 / each

Total price: $74.24 $

Warehouse availability: IN STOCK

Add to Cart

Miles STRATUS T Oils are high quality lubricants recommended for use in steam and gas turbines, as well as in the circulating oils systems of a wide range of industrial machinery.Miles STRATUS T Oils counteract rust and oxidation with blends of our exceptionally pure Hydro Treated (Hydrocracked) base oils, and specially selected additives. These formulations deliver reliable performance and extended service life.

Compared to conventional oils, Miles STRATUS T Oils offer:

• Outstanding, long term resistance to breakdown caused by air and high temperatures
• Superior rust and corrosion prevention
• Excellent water separability

PERFORMANCE BENEFITS

• Outstanding oxidation and thermal stability
• Longer life, which extends the time between oil changes
• Elimination of harmful sludge and varnish which can restrict lubricant flow and accelerate component wear
• reduces operating and maintenance costs
• Superior rust and corrosion protection
• Iron and metal components protected against water damage
• Reduces maintenance costs
• Excellent water separability and hydrolytic stability
• Reusable after water is removed because STRATUS T Oils separate readily from water without loss of performance additives
• Improved foam and air entrainment performance
• Prevents overflowing of circulating oil reservoirs
• Ensures a lubricant film continues to protect metal surfaces
• Eliminates damage to circulating oil pumps due to cavitation
• Improves equipment reliability

 

APPLICATIONS

Miles STRATUS T Oils are formulated to meet severe service requirements of steam and gas turbine applications. They also provide extended, corrosion-free lubrication of bearings and gears in a wide variety of industrial machinery. STRATUS T may be used in circulating oil systems, enclosed gear boxes, oil-filled couplings and other bearing applications.

TURBINES: Miles STRATUS T oils perform the following functions when used in turbine applications: lubricate and cool bearings, lubricate gears, provide a seal in gas-cooled units act as a hydraulic fluid in governors and vane actuators

 

They show excellent oxidation resistance and give long periods of trouble-free operation. STRATUS T Oils surpass most turbine manufacturers' and operators' requirements. They meet the following major steam and gas turbine manufacturers' specifications:

GE..................... EK28143A, GEK46506B

Westinghouse... 1500 00 20

Siemens........... TLV901301

ABB.................. K11081201, HTGD90117

Solar................ ES9224

Cooper............ SE1144

PLAIN BEARINGS: The lubrication efficiency of a plain or journal bearing depends on 4 factors; oil viscosity, bearing rotation speed, bearing load and operating temperature. To select the correct lubricant viscosity grade for a plain bearing, consider bearing rotation speed and operating temperature. The correct viscosity grade for various bearing rotation speeds and operating temperatures is below:

 

PLAIN BEARING LUBRICATION

Operating °C	Bearing Speed (RPM)Temperatures Below 300 300-2000 Above 2000
Below 0	STRATUS T 32	STRATUS T 32	STRATUS T 32
0-60	STRATUS T 46	STRATUS T 46	STRATUS T 32
60-93	STRATUS T 100	STRATUS T 68	STRATUS T 46

 

ANTI-FRICTION BEARINGS: In an anti-friction bearing, the load between the moving surfaces is taken by balls or rollers, not an oil film. This type of bearing requires much less power to overcome friction. However, the load on the balls or rollers and their races generates heat, which must be carried away by the lubricant. Optimum lubrication of an anti-friction bearing is achieved with the minimum supply of the lowest viscosity oil, at the operating temperature that:

• Removes heat generated by rolling friction
• Minimizes fluid friction

Protects surfaces against rust and corrosion

The correct viscosity grade of STRATUS T Oil for various bearing speed factors (bore diameter in inches X rpm) and operating temperatures follows:

ANTI-FRICTION BEARING LUBRICATION

Operating Temperatures Speed Factor (Bore in inches X RPM) °F Below 3000 3000-6000 Above 6000
Below 32	STRATUS T 22	STRATUS T 22	STRATUS T 22
32-140	STRATUS T 32	STRATUS T 22	STRATUS T 22
140-199.4	STRATUS T 150	STRATUS T 68	STRATUS T 46
Above 199.4			STRATUS T

 

GEARS: When a gear-set is lubricated with an oil film, lubrication efficiency depends on the contours oif the gear teeth, the load on the gears and their rotational speed. The American Gear Manufacturers Association (AGMA) has taken these factors into consideration in drafting various gear lubricant standards for industrial machinery. Miles Petroleum's PRIMEX T Oils are recommended for use when the AGMA specifies Non-EP oils:

GEAR LUBRICATION

AGMA Lubricant Number	STRATOS T Oil
1	STRATUS T 150
2	STRATUS T 68
3	STRATUS T 100

 

STRATUS T	32
ISO Grade	32
Color	1.0
Density Kg/L @ 59 °F	0.861
Viscosity CSt @ 40 °C Sus/ 100 ° F	31.1 150 Sus
ViscsityIndx	100
Flash Point °F	410
Pour Point °F	-32.8
Oxidation Stability, hrs	4500+
RBOT, mins	400
Rust Test Procedure A & B, 48 hrs	PASS
Water Seprblty129.2 °F	41-39-0(5)
Total Acid # (TAN)	.10
Bearing & Gear LubrctnOperatg Temp	-9.4 To 145.4

WARNING:
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.