|Safety Data Sheet||Download|
MILES SUPER RED GREASE (35 lb.)
vol: 5 Gal. / PAIL
Total price: $268.23
Warehouse availability: IN STOCK
Super Red EP 2 Grease is a heavy duty multi-purpose grease formulated from high viscosity base oil and lithium complex thickener. This heavy-duty grease offers high load capability with a Timken OK Load ofÂ 80 lbs. and contains tackiness additive to enhance retention on lubricant parts. These properties helpÂ form an effective seal to help minimize bearing contamination and stay in-place while in service.
Super Red EP 2 Grease contains high performance extreme pressure additives, low shear tackifiers, with rust and oxidation inhibitors that provide excellent wear protection. This grease does not easily washout Acircunder heavy water ingress and exhibits good pumpability even at lower temperatures. It is also NLGIÂ GC-LB certified for use as a multi-purpose automotive wheel bearing and chassis grease.
Extreme Pressure Properties
Excellent Temperature Stability
Extraordinary Performance at High and Low Temperatures
Does Not Washout Preventing Rust and Oxidation
Superior Pumpability and Will Not Alter or Harden in Storage
Super Red EP 2 Grease has a very wide operating temperature range allowing for excellent high temperature protection. It is recommended for high temperature, heavy duty greasing applications of bearings, rolling elements, antifriction bearings, high temp wheel bearings/disc brakes, electric motor bearings, throw-out bearings, universal joints, fifth wheels and more. This grease is an excellent choice for slow to moderate speed bearing applications in agricultural, automotive, construction, cement, industrial, marine, mining, oil and gas, paper and pulp, railroad, steel and trucking industries.
Typical Performance Data
|NLGI Grade||ASTM D-217||2|
|WORKED PENETRATION @ 25º C||ASTM D-217||265 - 295|
|Thickener Type||DATA||Lithium Complex|
|Dropping Point||ASTM D-2265||550 - 600º F|
|Viscosity @ 40 ºC, cSt||ASTM D-445||451.0|
|Timken OK Load||ASTM D-2509||70 - 80 LBS|
|4-BALL WELD LOAD||ASTM D-2596||500 KG|
|WATER SPRAY-OFF, % WT||ASTM D-4049||7.0 - 10.0|
|COPPER STRIP CORROSION||ASTM D-4048||1B|
|RUST PREVENTION||ASTM D-1743||PASS|
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.