|Safety Data Sheet||Download|
MILES SUPER RED GREASE (400 lb.)
vol: 55 Gal. / DRUM
Total price: $1243.1
Warehouse availability: IN STOCK
Super Red EP 2 Grease is a heavy-duty multi-purpose grease formulated from high-viscosity base oil and lithium complex thickener. This heavy-duty grease offers high load capacity with a Timken OK Load of 80 lbs. and contains a tackiness additive to enhance retention on lubricant parts. These properties help form an effective seal to help minimize bearing contamination and stay in place while in service.
Super Red EP 2 Grease contains high-performance extreme pressure additives, and low-shear tackifiers, with rust and oxidation inhibitors that provide excellent wear protection. This grease does not easily wash out under heavy water ingress and exhibits good pump ability even at lower temperatures. It is also NLGI Acirc GC-LB certified for use as a multi-purpose automotive wheel bearing and chassis grease.
Extreme Pressure Properties
Excellent Temperature Stability
Extraordinary Performance at High and Low Temperatures
Does Not Washout Preventing Rust and Oxidation
Superior Pump ability and Will Not Alter or Harden in Storage
Super Red EP 2 Grease has a very wide operating temperature range allowing for excellent high-temperature protection. It is recommended for high-temperature, heavy-duty greasing applications of bearings, rolling elements, antifriction bearings, high temp wheel bearings/disc brakes, electric motor bearings, throw-out bearings, universal joints, fifth wheels, and more. This grease is an excellent choice for slow to moderate speed-bearing applications in agricultural, automotive, construction, cement, industrial, marine, mining, oil and gas, paper and pulp, railroad, steel, and trucking industries.
Typical Performance Data
|NLGI Grade||ASTM D-217||2|
|WORKED PENETRATION @ 25º C||ASTM D-217||265 - 295|
|Thickener Type||DATA||Lithium Complex|
|Dropping Point||ASTM D-2265||550 - 600º F|
|Viscosity @ 40 ºC, cSt||ASTM D-445||451.0|
|Timken OK Load||ASTM D-2509||70 - 80 LBS|
|4-BALL WELD LOAD||ASTM D-2596||500 KG|
|WATER SPRAY-OFF, % WT||ASTM D-4049||7.0 - 10.0|
|COPPER STRIP CORROSION||ASTM D-4048||1B|
|RUST PREVENTION||ASTM D-1743||PASS|
Causes skin irritation. Causes eye irritation. Wash after handling. Wear protective gloves/ protective clothing/ eye protection. IF ON SKIN, wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Dispose of contents/ container to an approved waste disposal plant.